CSRD

Sustainability in real estate: ESG compliance guide

Alba Selva Ortiz avatar Alba Selva Ortiz · · 12 min read
Sustainability in real estate: ESG compliance guide

Photo by Jan Kahanek on Unsplash

Utility bills, meter readings, tenant records and refurbishment plans already tell a property business how its buildings operate. Connecting those records makes it easier to identify avoidable energy costs, plan improvements and explain emissions across a portfolio. Owners and managers often rebuild that information for separate investor, tenant and reporting requests, which leaves less time to act on it.

A practical real estate sustainability programme starts with a consistent view of each asset. Record what the building consumes, who controls the equipment, which areas the data covers and where the evidence comes from. The same environmental data can then support operating budgets, renovation decisions and applicable disclosures.

Why sustainability is reshaping the real estate sector

Buildings use energy throughout their operating life, while construction and refurbishment bring emissions from materials and site activity. The balance differs by building type, climate, energy supply and expected life. An occupied office, a refrigerated warehouse and a new residential development need different assessment boundaries and improvement plans.

For asset managers, the challenge is to connect this performance with decisions about occupancy, maintenance, leases and capital expenditure. A portfolio total can identify the scale of the issue. Asset-level records explain where to investigate and whether a proposed intervention is financially and technically feasible.

Building energy performance and operational carbon

Measure consumption before comparing buildings

Track electricity, fuels, purchased heat and cooling by asset and reporting period. Record the floor area served, operating hours and occupancy so comparisons have a clear denominator. Energy use intensity in kWh/m² is useful when the area definition and period match. Review absolute consumption alongside intensity to see whether a lower ratio reflects an efficiency improvement or a change in use.

Meter records, utility bills and building management systems serve different purposes. Bills help reconcile purchased energy, while interval readings can reveal unusual overnight loads or equipment schedules. Record missing periods and estimated values so portfolio comparisons show the quality of the underlying data.

Define the emissions boundary

Assign emissions using the company’s chosen consolidation approach and its control over the assets. On-site fuel combustion and refrigerant leakage may fall into Scope 1, while purchased electricity or heat may fall into Scope 2. For Scope 2, retain the distinction between location-based and market-based results where required.

Landlord and tenant responsibilities need particular attention. A utility account in the tenant’s name does not, by itself, settle the accounting classification. Document lease arrangements, control and coverage before assigning the emissions to a scope.

Embodied carbon in construction and renovation

Refurbishment decisions should consider the emissions associated with materials, transport, construction, replacements and end-of-life treatment within the assessment boundary. Establish a reference period and equivalent building function before comparing renovation with replacement. Retaining a structure may avoid new material demand, but the assessment also needs to consider the building’s future energy use and service requirements.

Collect quantities and specifications for major materials such as concrete, steel, insulation and finishes. Supplier environmental product declarations can inform an assessment when their units, boundaries and product coverage fit the project. Review them alongside the quantities actually installed and the replacement assumptions used. Measuring the carbon footprint of construction materials.

Portfolio-level emissions tracking across properties

Keep an asset register and coverage record

Give every property a stable identifier and link it to meters, suppliers, ownership interests and reporting periods. Record the share of the building covered by each source, including common areas and tenant spaces. This helps prevent duplicate bills, gaps after a property changes manager and comparisons between complete and partial records.

RecordWhat to retainWhy it matters
Energy useQuantity, unit, dates, meter and source billReconciles emissions and operating expenditure
Building areaArea definition, measurement and effective dateMakes intensity comparisons interpretable
Tenant dataCoverage, period, permission and estimatesShows which leased spaces are included
EquipmentFuel type, refrigerants and maintenance historySupports operating and replacement decisions
Renovation evidenceScope, baseline, costs and performance assumptionsAllows investment proposals to be reviewed

Treat leased assets and investments consistently

GHG Protocol Category 13 covers emissions from downstream leased assets that are outside the lessor’s Scope 1 and Scope 2 boundary. Category 15 may be relevant to investments, depending on the portfolio and consolidation approach. Review the applicable categories before aggregating tenant and investment figures. GHG Protocol calculation guidance.

For year-on-year comparisons, identify acquisitions, disposals, changes in occupancy and revisions to estimates. Keep a like-for-like view where useful alongside the reported portfolio total. A lower figure following a property sale has a different explanation from lower consumption in a retained building.

CSRD reporting requirements for real estate companies

A REIT or property company needs an entity-specific scope assessment. Directive (EU) 2026/470 changes the general EU reporting scope to companies exceeding both 1,000 average employees and €450 million in net turnover, on a consolidated basis where applicable. Check the financial year, group rules, exemptions and national implementation when determining the obligation. The directive also allows Member States to exempt certain companies below the revised thresholds for financial years 2025 and 2026. Directive (EU) 2026/470.

A company in scope should assess its material impacts, risks and opportunities. Real estate assessments may consider building energy and emissions, physical climate risk, resource use, pollution, biodiversity and the people affected by construction or property operations. The material topics and disclosures depend on the business and the applicable ESRS version.

Businesses outside direct reporting scope can still receive environmental data requests from lenders, tenants or larger customers. Define what each request requires and reuse the relevant records with the appropriate boundary and evidence. CSRD resource hub.

EU Taxonomy alignment for real estate activities

Eligibility identifies an activity covered by the Taxonomy. Alignment requires evidence that the activity satisfies the applicable substantial-contribution criteria, do-no-significant-harm criteria and minimum safeguards. An EPC or an energy improvement is part of that assessment and should be considered with the remaining conditions.

For the climate-mitigation criteria, property teams commonly assess the following activities.

  1. New construction, Activity 7.1. Check the required primary energy demand against the national nearly zero-energy building threshold. The criteria include a level at least 10% below that threshold, with additional testing and life-cycle assessment provisions for buildings larger than 5,000 m².
  2. Renovation, Activity 7.2. Assess the major-renovation compliance route or the alternative route based on at least a 30% reduction in primary energy demand. Retain the baseline, calculation and evidence relevant to the route used.
  3. Acquisition and ownership, Activity 7.7. For buildings built before 31 December 2020, check the EPC A or evidenced top-15% performance route. Later buildings have different criteria linked to new construction, and additional conditions may apply.

Use the consolidated criteria applicable to the assessment and record the basis for each decision. Connect eligible and aligned activities to the required financial indicators rather than treating the whole portfolio as aligned because selected assets perform well. Taxonomy Climate Delegated Act.

EPBD requirements and the road to decarbonization

The recast EPBD sets milestones that Member States implement through national rules. For new buildings, the zero-emission standard applies from 1 January 2028 to buildings owned by public bodies and from 1 January 2030 to all new buildings. Its focus includes energy demand and on-site fossil-fuel emissions. European Commission guidance on zero-emission buildings.

For existing non-residential buildings, the directive uses nationally determined performance thresholds targeting the worst-performing 16% by 2030 and 26% by 2033. Residential requirements use national stock-level energy-reduction trajectories. Owners should check national implementation, exemptions and building-specific requirements when planning works. European Commission renovation guidance.

Translate these requirements into an asset plan with technical surveys, lease constraints, project dependencies and budget decisions. A staged retrofit can coordinate fabric improvements, heating replacement and electrical capacity. Document the expected savings and the evidence that will be used to assess delivery.

How Dcycle supports environmental data management for property portfolios

Dcycle is an environmental data platform for collecting, structuring and reusing operational information. For property teams, a useful starting point is a shared dataset of building consumption, supporting bills, activity data and emissions calculations. Finance can review expenditure, operations can investigate consumption, and reporting teams can prepare outputs from the same sources.

During a pilot, test the actual collection route for each source, including configured integrations and controlled file imports. Check how the workflow handles missing months, ownership changes, tenant coverage and corrections. Confirm the calculations and exports required by your portfolio before agreeing the implementation scope. Automated data collection.

Use your own property records to see how Dcycle connects environmental data with portfolio reporting, cost analysis and operating decisions.

Request a demo

8 practical strategies for real estate decarbonization

1. Improve building controls and commissioning

Review heating, cooling and ventilation schedules against occupancy and use. Investigate equipment operating outside expected hours, conflicting controls and faulty sensors. Start with an asset where the data can support a baseline, then compare energy use, comfort and maintenance issues after the adjustment.

2. Build a tenant data and engagement programme

Agree how landlord and tenant teams will share consumption data, address gaps and review progress. Green lease provisions can define access, responsibilities and cooperation, subject to the agreement and local rules. Offer tenants a practical review of their usage and record which improvements each party can control.

3. Use certification to organise performance evidence

BREEAM, LEED or DGNB can provide a framework for assessing a building and documenting project requirements. Choose the scheme and version that fit the asset and intended use. Track the underlying energy and material performance so the certification process supports operating decisions and the applicable evidence requirements.

4. Assess renewable energy and electrification together

Evaluate roof space, electrical capacity, demand profiles and planned equipment replacement before sizing on-site generation or new heating systems. For purchased electricity, check the contractual evidence used in market-based accounting. Compare consumption, emissions and costs under clearly stated energy and price assumptions.

5. Prioritise renovations using asset-level evidence

Rank projects by technical need, estimated savings, capital cost, disruption and regulatory exposure. Consider the timing of lease events and equipment end-of-life. Use a consistent baseline and sensitivity analysis so investment committees can compare proposals whose savings depend on different assumptions.

6. Investigate refrigerants and maintenance losses

Keep equipment and refrigerant records with service visits, leak repairs and quantities added. Use that history to identify recurring problems and assess replacement options with qualified specialists. Review energy efficiency and the relevant refrigerant implications together when selecting new equipment.

7. Reduce material demand during refurbishment

Survey existing components before specifying replacement. Compare repair, retention and reuse with new purchases, taking technical suitability and service life into account. Track material quantities and waste destinations so the project team can evaluate both embodied emissions and procurement costs.

8. Verify savings after the project

Agree the measurement period and method before works begin. Compare the result with the baseline while accounting for weather, occupancy, operating hours and floor-area changes where relevant. Report absolute consumption and emissions alongside appropriate intensity indicators, and investigate differences between forecast and measured savings.

Tip: Start with one building where bills, floor area and occupancy data can be reconciled. Use the pilot to agree the comparison method before ranking the rest of the portfolio.

Turn portfolio data into an investment plan

Select a group of assets with comparable records and identify the largest evidence gaps first. Give each improvement proposal a baseline, an owner, a budget and a way to measure the result. Review the technical dependencies and tenant constraints before committing to a timetable.

A maintained environmental dataset makes the next review easier. Teams can update consumption, verify completed works and explain movements in the portfolio footprint using the same records. That connects reporting with the recurring decisions that determine operating cost and building performance.

Frequently Asked Questions (FAQs)

Does CSRD apply to REITs and real estate investment trusts?

A REIT must assess its reporting entity, group structure, financial year and applicable national rules. The revised general EU scope under Directive (EU) 2026/470 combines more than 1,000 average employees and more than €450 million in net turnover. Transitional exemptions and group provisions also matter. Review the CSRD resource hub alongside the applicable legislation.

Which ESRS topics are most material for real estate companies?

Assess material impacts, risks and opportunities for the portfolio and its activities. Energy and climate, resource use, pollution, biodiversity and workforce or value-chain conditions may all be relevant. The assessment determines which topics and disclosures apply under the ESRS version used.

What real estate activities are eligible under the EU Taxonomy?

The Taxonomy covers construction of new buildings (Activity 7.1), renovation of existing buildings (Activity 7.2), installation and maintenance of energy efficiency equipment (Activity 7.3), installation of charging stations (Activity 7.4), and acquisition and ownership of buildings (Activity 7.7). Each activity has specific technical screening criteria related to energy performance, lifecycle assessment, and do no significant harm conditions covering water, pollution, biodiversity, and circular economy.

How do real estate companies track Scope 3 tenant emissions?

First document the consolidation approach and control over the leased assets. Category 13 includes downstream leased-asset emissions outside the lessor’s Scope 1 and Scope 2. Collect meter or utility data through appropriate agreements and label estimates where data is incomplete. Avoid counting the same source twice.

Which environmental initiatives reduce carbon footprints in real estate portfolios?

The most effective initiatives usually combine building energy-efficiency upgrades, renewable electricity, better controls and commissioning, tenant engagement, low-carbon refurbishment, and improved data on refrigerants and purchased materials. Prioritise assets using energy intensity, emissions, operating cost, regulatory exposure, and expected savings. Portfolio-level data helps owners compare interventions and verify whether reductions come from real operational improvement rather than changes in occupancy or estimation methods.

How should real estate teams compare platforms for utility and sustainability data?

Compare how each platform collects utility bills and meter data, handles multiple properties and owners, validates missing values, and preserves evidence for every reported figure. The strongest option should connect energy, water, waste, tenant, and emissions data to portfolio decisions rather than producing a dashboard that still requires manual reconciliation.

What should an ESG advisory budget for a real estate portfolio include?

Include portfolio scoping, data collection, materiality work, methodology, regulatory interpretation, implementation support, assurance preparation, and ongoing updates. Costs also depend on the number of assets, the quality of utility and tenant data, ownership structures, and the number of reporting frameworks. A clear pilot and defined deliverables make proposals easier to compare.

SustainabilityCarbon FootprintCSRDCompliance
30-minute demo

See it with your own data.

Thirty minutes with our team. We show you how your data would come in, and what you would get out.

See Dcycle in action
  • No commitment
  • With your data
  • In your language

What your session looks like

  1. 01 You tell us what you’re being asked forCustomers, auditors or banks: what data and by when. 0–5 min
  2. 02 We show how your data comes inInvoices, ERP, suppliers: on an example close to yours. 5–20 min
  3. 03 You leave with a planWhat to automate first and how much time you save. 20–30 min
With someone from the team who then supports you