Every framework. One platform.
Stop duplicating data across standards. Dcycle maps your sustainability data to CSRD, CDP, ISO, EcoVadis, SBTi, GRI and more, from a single source of truth.
CSRD reporting, automated end to end
Navigate all 12 ESRS topics with built-in gap analysis, double materiality assessment and XBRL-tagged report generation. Dcycle maps every data point to the correct disclosure requirement so you meet audit deadlines without surprises.
- ESRS topic navigator with gap analysis
- Double materiality assessment
- XBRL-tagged report export
- Audit-ready traceability
Score higher on CDP with less effort
Dcycle pre-maps your climate data to the CDP questionnaire structure. Scope 1, 2 and 3 emissions, reduction targets and governance responses are populated automatically from your existing data, so you answer every question with auditable figures instead of estimates.
- Auto-mapped CDP questionnaire responses
- Scope 1, 2 and 3 data pre-filled
- Target-setting and progress tracking
- Evidence linking for every answer
| DATA POINT | GHG PROTOCOL | CSRD / ESRS | ISO 14064 | ECOVADIS |
|---|---|---|---|---|
| Electricity | Scope 2 | E1-5 | Cat 2 | ENV |
| Natural Gas | Scope 1 | E1-4 | Cat 1 | ENV |
| Business Travel | Scope 3.6 | E1-6 | Cat 3 | ENV |
| Water Use | — | E3-4 | — | ENV |
Life cycle assessment at product level
Model any product as a process flow and get its footprint broken down by EN 15804 life cycle stage, from raw material supply to end of life. Match every material to ecoinvent, compare design scenarios and export a report already structured for ISO 14040, 14044 and 14067.
- Results by EN 15804 stage, A1 to C4
- Reports structured for ISO 14040, 14044 and 14067
- ecoinvent matching with region control
- Multi-product LCAs with impact allocation
ISO 14001 compliance, continuously monitored
Keep your environmental management system audit-ready at all times. Dcycle tracks the environmental aspects and impacts your EMS requires, links them to documented evidence, and flags deviations in real time so corrective actions happen before the auditor arrives.
- Continuous EMS monitoring
- Environmental aspect tracking
- Evidence-linked documentation
- Real-time deviation alerts
ISO 14064 carbon inventories, verified faster
Build your organisational carbon inventory following ISO 14064 methodology. Dcycle structures your Scope 1, 2 and 3 data according to the standard's requirements, applies verified emission factors and generates the documentation your verifier needs in a fraction of the time.
- ISO 14064-compliant carbon inventory
- Scope 1, 2 and 3 structured data
- Verified emission factors applied
- Verifier-ready documentation
ISO 50001 energy management, data-driven
Monitor energy consumption patterns, set baselines and track improvement targets across facilities. Dcycle aggregates utility data from all your sites, identifies consumption anomalies and measures the impact of energy efficiency initiatives against your ISO 50001 objectives.
- Multi-site energy monitoring
- Baseline and target tracking
- Anomaly detection
- Efficiency initiative impact measurement
CSRD / ESRS GHG Protocol ISO 14064 EcoVadis 
CDP 
EINF 
Maximize your EcoVadis score
Prepare for your EcoVadis assessment with data and evidence already organised by theme: environment, labour, ethics and sustainable procurement. Dcycle maps your existing sustainability data to EcoVadis scoring criteria, highlights gaps in documentation and helps you build the evidence portfolio that drives higher scores.
- Data mapped to EcoVadis themes
- Scoring gap identification
- Evidence portfolio builder
- Year-over-year score tracking
Set and track science-based targets
Define near-term and net-zero targets aligned with SBTi criteria. Dcycle calculates your baseline emissions, models reduction pathways and tracks progress against your committed trajectory, so you can demonstrate credible climate action to stakeholders and investors.
- SBTi-aligned target setting
- Baseline emissions calculation
- Reduction pathway modelling
- Progress tracking against targets
GHG Protocol carbon accounting, streamlined
Build your corporate carbon inventory following the GHG Protocol Corporate Standard. Dcycle structures your Scope 1, 2 and 3 data according to the standard's operational and equity share approaches, applies verified emission factors and generates the documentation your stakeholders and verifiers expect.
- GHG Protocol Corporate Standard methodology
- Scope 1, 2 and 3 structured reporting
- Operational and equity share approaches
- Verified emission factors and audit trail
45,320 kWh · Q1 2026
8,400 L · Jan 2026
12 trips · Q1 2026
GLEC-compliant logistics emissions
Calculate transport and logistics emissions following the GLEC Framework (now ISO 14083). Dcycle breaks down emissions by route, mode and carrier, supporting multimodal shipments with well-to-wheel and tank-to-wheel factors so your supply chain reporting meets the latest standards.
- GLEC / ISO 14083 methodology
- Route-level emission breakdown
- Multimodal transport support
- Well-to-wheel and tank-to-wheel factors
Lean & Green, certified logistics decarbonisation
Lean & Green is the European sustainability programme for logistics and transport companies, run in Spain by AECOC. It asks you to prove a verified 20% cut in transport emissions over five years, calculated with the GLEC v3.0 methodology (ISO 14083). Dcycle covers the full cycle: baseline, network analysis, quantified reduction initiatives and the narrative plan verifiers ask for.
- Baseline under GLEC v3.0 / ISO 14083
- Quantified reduction initiatives
- Support during AECOC verification
- Annual progress tracking
FLAG emissions for forest, land and agriculture
Calculate emissions from crops, land management units and agricultural inputs using official MITECO emission factors by province. Dcycle distinguishes land you own from land operated by a supplier, ready for SBTi and GHG Protocol FLAG reporting.
- MITECO emission factors by province
- Official crop typologies
- Own vs supplier-operated land
- Links to existing facilities and vehicles
VS reporting for SMEs, formerly VSME
Use the Voluntary Standard (VS), formerly VSME, without the complexity of full ESRS. Dcycle provides a streamlined data collection workflow tailored to the VS reduced disclosure set, so smaller companies can demonstrate sustainability credentials to clients and supply chain partners with minimal overhead.
- Streamlined VS data collection
- Reduced disclosure set
- Supply chain partner reporting
- Scalable to full ESRS when needed
GRI reporting with full traceability
Prepare your GRI-aligned sustainability report with every indicator backed by traceable data. Dcycle maps your collected metrics to the corresponding GRI Standards, identifies which disclosures are covered and which need attention, and generates structured output ready for your sustainability report.
- GRI Standards mapping
- Disclosure coverage analysis
- Traceable data for every indicator
- Structured report output
EU Taxonomy reporting, from perimeter to Article 8 KPIs
A dedicated EU Taxonomy project: decide which activities count with the official catalogue, validate your turnover, CapEx and OpEx denominators, assess each activity against the verbatim criteria of the Delegated Acts and get Templates 1 and 2 of Annex II computed from your figures and verdicts. Your team makes each verdict; Dcycle keeps the evidence and exports the report to Excel.
- Perimeter from the official catalogue, with NACE codes
- Validated denominators and numerator lines
- Substantial contribution, DNSH and minimum safeguards with evidence
- Annex II Templates 1 and 2 exported to Excel
PPWR compliance, packaging by packaging
Register the packaging you place on each EU market, grade its recyclability per SKU with the PPWR methodology, and file verifiable annual data. In force since 12 August 2026, with staggered deadlines to 2040 and penalties of up to 4% of annual revenue applied country by country.
- National packaging registration
- A-E recyclability grade per SKU
- Declaration of conformity and QR
- Format checks: void space, reuse, single-use
EUDR due diligence on your supply chain
The EU Deforestation Regulation requires proof that cattle, cocoa, coffee, palm oil, rubber, soy and timber placed on the EU market are deforestation-free, with geolocation of the plot of origin. Dcycle collects that evidence from your suppliers and keeps it traceable for the due diligence statement.
- Supplier evidence collection
- Plot geolocation data
- Risk assessment by origin
- Traceability for the due diligence statement
SFDR disclosures your investors can trace
SFDR 2.0 replaces the Article 8 and 9 labels with three product categories backed by minimum criteria, and funds can only claim a category if the underlying investee data holds up. Dcycle produces the principal adverse impact indicators and the taxonomy figures on the same data layer that feeds your CSRD report, so what an asset manager receives is traceable to its source.
- Principal adverse impact (PAI) indicators
- Consistent with your CSRD and taxonomy figures
- Every metric traceable to its source file
- Portfolio view for asset managers
Promotes environmental & social characteristics
Sustainable investment objective
CNBV/NIS Mexico sustainability disclosure
Prepare for Mexico's mandatory ISSB-aligned sustainability reporting under the CNBV Sustainability Information Standard (NIS). Dcycle maps your climate and ESG data to the NIS disclosure requirements, aligns with IFRS S1 and S2, and generates structured reports ready for filing with the Mexican National Banking and Securities Commission.
- ISSB-aligned NIS disclosure mapping
- IFRS S1 and S2 data structuring
- CNBV filing-ready report generation
- Cross-framework data reuse with CSRD and CDP
| DATA POINT | GHG PROTOCOL | CSRD / ESRS | ISO 14064 | ECOVADIS |
|---|---|---|---|---|
| Electricity | Scope 2 | E1-5 | Cat 2 | ENV |
| Natural Gas | Scope 1 | E1-4 | Cat 1 | ENV |
| Business Travel | Scope 3.6 | E1-6 | Cat 3 | ENV |
| Water Use | — | E3-4 | — | ENV |
RENE Mexico emissions registry, streamlined
Comply with Mexico's National Emissions Registry (RENE) by structuring your GHG inventory according to SEMARNAT requirements. Dcycle automates Scope 1 and Scope 2 data collection across facilities, applies Mexican emission factors, and generates the annual COA submission that companies emitting 25,000+ tCO2e must file.
- SEMARNAT-compliant GHG inventory
- Multi-facility Scope 1 and 2 tracking
- Mexican emission factor library
- Automated COA submission preparation
45,320 kWh · Q1 2026
8,400 L · Jan 2026
12 trips · Q1 2026
Ley 9/2025: sustainable commute plans, covered
Spain's Sustainable Mobility Law requires companies with 200+ employees to approve a Plan de Movilidad Sostenible al Trabajo (PMST) by December 2026. Dcycle's existing Scope 3 commuting survey already captures the transport mode data required for the mandatory diagnostic. An extended PMST module adds shift data, transport choice reason, and perceived route risks – completing the legal obligation without duplicating effort.
- Mandatory diagnostic from existing Scope 3 data
- Extended PMST module for full legal coverage
- Compliance tracking toward December 2026 deadline
- EDIM registration readiness
45,320 kWh · Q1 2026
8,400 L · Jan 2026
12 trips · Q1 2026
Frequently asked questions
Which sustainability frameworks does Dcycle support?
How does Dcycle handle data across multiple frameworks?
Do I need to set up each framework separately?
Can Dcycle help with frameworks it does not fully automate?
Are the generated reports accepted by auditors and verifiers?
What if I only need one framework today but may add more later?
How quickly can I get started with Dcycle?
See it with your own data.
Thirty minutes with our team. We show you how your data would come in, and what you would get out.